interface SHDSL 0/0

Symmetric High-speed Digital Subscriber Line (SHDSL, sometimes called G.SHDSL) is a popular WAN access technology using copper wire pairs.

The purpose of this command is to configure physical-layer properties of SHDSL, such as the number of wire-pairs in use. See the sub-commands "mode" and "group" for additional information.

Once the physical layer is configured, proceed to ATM interfaces using the command "interface atm".

Syntax

interface shdsl <slot>/<port>

Command	Description
slot	Defines the location of the SHDSL hardware mezzanine. Must be 0.
port	Defines the location of the SHDSL hardware mezzanine.

Default

The system will attempt to detect the correct configuration automatically, by sensing line connectivity and negotiating connection parameters with the Internet Service Provider.

Command Mode

Privileged User

Example

The example below describes how to define the SHDSL interface.

(config-data)# interface shdsl 0/0